Z3043X13 rocker hakowa jirgin

Drilling Max diamita (mm) karfe 40 karfe 32
Spindle karshen fuska zuwa tebur nesa (mm) 260-1150
Spindle tsakiya zuwa madaidaiciya madaidaiciya nesa (mm) 360-1300
shaft tafiya (mm) 200
Spindle cone rami (Mohs) 4
Spindle gudun kewayon (rpm) 75, 130, 240, 380, 660, 1200
Spindle gudun matakin 6
Spindle ciyar kewayon (rpm) 0.10-0.25
Adadin ciyar da shaft 3
Rocker hannu juyawa kusurwa (°) 360
Babban injin ikon (kw) 2.2
ɗaga motor ikon (kw) 1.5
Injin nauyi (kg) 1400
girman (mm) 1800 × 810 × 2300

Z3043X13 Rocker Drill na'ura Features:
1: Wannan inji kayan aiki ta atomatik ɗaga da sauka, ta atomatik ciyar da shaft, inji kulle, inji m. Electrical inji biyu Layer kariya.
2: Injin kayan aiki ciyar da tsari sanye da karewa na'urar, ciyar da coconut ƙafafun sanye da lubrication na'urar.
3: Wannan samfurin inji kayan aiki raba zuwa guda ginshike da biyu ginshike, biyu ginshike inji rocker hannu juya sassauƙa, aiki inganci high.
Z3040X13 rocker hakowa na'ura ne kunshe da chassis, madaidaiciya ginshike, m hannu, spindle akwatin, ɗaga akwatin, aiki dandamali da sauransu. Rocker Arm Drill Arm iya yin a kusa da ginshike
360 digiri juyawa, kuma za a iya yi hagu da dama motsi a fadin madaidaicin ginshiƙi don madaidaicin motsi tafiya zuwa 1000mm, akwatin shaft zai iya yi hagu da dama motsi a fadin madaidaicin ginshiƙi, saboda haka manyan fasali na rocker hannu hakowa na'ura ne: karfi m, m kewayon aikace-aikace, dacewa da aiki na manyan workpieces.
Rashin amfani da hannun hannu shine: Saboda haɗin sama mafi yawa, taurin kayan aikin inji da daidaito suna da ƙarancin ƙarancin.
Z3040X13 amfani da tsari:
1, a lokacin aiki, tsananin haramtaccen sa hannu, workpiece clip ya kamata ya kasance da ƙarfi, hakowa kananan sassa, aikace-aikace da flat baki clip ko kayan aiki clip riƙe, ba za a yarda da hannu clipping hakowa.
2. A lokacin da aka fara hakowa, ba a yarda da hannu don taɓa, ba a yarda da juyawa, matsa lamba ko auna.
3, a cikin m hannu juyawa kewayon, ba a yarda da tsaya mutum, m hannu ya kamata ya karfi.
4, a ƙarƙashin hannu, a kan teburin aiki, ba a yarda da abubuwa ba, ba a yarda da shinge ba.
5, amfani da ta atomatik tafiya wuka, ya kamata daidaita da kyau iyaka wuri block, da hannu ciyar da, kada ka wuce.
6, lokacin da akwai dogon baƙin ƙarfe chips a kan drill, don dakatar da baƙin ƙarfe hook tsabtace, hana iska buga ko hannu jawo rocker drill na'urar yafi kunshe da tushe, ciki ginshiƙi, waje ginshiƙi, rocker, spindle akwatin da kuma teburin aiki
Rocker Drill Main sassa cirewa Order:
(1) yanke wutar lantarki, cire duk injin lantarki da kuma abubuwan da suka shafi lantarki.
(2) cire akwatin shaft daga karshen dama na rocker.
(3) Yi rocker arm goyon baya da kyau ko hanging karfi, cire ɗaga injin
(4) ɗaga rocker hannu.
(5) Jigilar ginshiƙi na waje.
(6) cire ginshiƙin ciki daga tushe.
(7) cire tushe (kamar a wurin gyara ko ba tare da surface planer aiki, za a iya cire tushe ba).