Silicon roba dumama panel (matsakaicin zafi fasaha) gabatarwa

Matsakaicin zafin jiki (silikon roba dumama panel) yana da ƙarancin siffar fuska mai dumama tare da taushi mara misali na ƙarfe na gargajiya.

• An yi shi ne ta hanyar shigar da silicone a cikin filayen fiber gilashi sama da ƙasa biyu.

• Saboda kayayyaki ne mai nauyi, yana da kyakkyawan zafi (daidaitaccen kauri na 1.5mm).

• Yana da taushi, don haka abubuwan da aka dumama za a iya tuntuɓar su gaba ɗaya, kamar silinda mai laushi, da dai sauransu.

Jikin dumama na fuska shine carbon, yayin da jikin dumama na silicone shine wayar juriya ta nickel chromium, don haka ana iya amfani da shi cikin kwanciyar hankali.

Silicone roba dumama panel (matsakaicin zafi fasaha) siffofi

• 1, siffar matsakaicin zafi dumama allon za a iya yin kyauta.

Ba kamar na'urar dumama na carbon na yau da kullun ba, na'urar dumama ta silicon tana da siffar da aka tsara ta hanyar juriya ta nickel, ana iya sarrafa siffar abubuwan dumama a cikin kyauta zuwa zagaye, triangle, da dai sauransu.

• Za a iya aiki a cikin wani gajeren lokaci (daya kawai akwai).

2, Za a iya tsarawa bisa ga bukatun.

Wannan samfurin za a iya amfani da daban-daban kayan aiki a daban-daban masana'antu.

• Saboda yana da nauyi mai nauyi, kuma yana da laushi, ana amfani da shi a kan sauran kayayyaki, za a iya cimma haske da ƙarami. Rashin kayayyakin dumama da sauri; Ba zai yiwu a sarrafa zafin jiki ba, saboda haka ana buƙatar daidaita zafin jiki.

3, na yau da kullun irin, E irin, MG irin za a iya amfani da rabin dindindindin a karkashin yanayin 200 ℃.

• Samun mannewa da abubuwa da aka dumama

A kasa da 100 ℃ ne ....................................................................................................................................................................................................................................................................................................................................

A kasa da 100 ℃ ~ 150 ℃.........................................................................................................................................................................................................................................................................................................................................................

4, H-irin mafi girman zafin jiki zai iya zuwa 300 ℃.

• 300 zafi juriya adhesives akwai, mu kamfanin yana da KE3418RTV (B) wasika a kan sinadarai agent.

Silicone roba dumama farantin (matsakaicin zafi fasaha) model

Standard Type na Matsakaicin zafin jiki dumama allon

Wutar lantarki densityYawancin lokaci 0.6 ~ 0.8w / cm2.

Amma saboda yanayin shigarwa na mai dumama, daban-daban hanyoyin sarrafa zafi za su canza sosai, don Allah tabbatar da zaɓi.

fasaha sigogi

zafi juriya

Cikakken amfani da zafin jiki: 200 ℃

Matsakaicin zafin jiki: 250 ℃

halayen lantarki

Ikon haƙuri: ƙasa 10%

Kare juriya: 100MΩ

ƙarfin lantarki juriya: 1500V (50HZ) / 1min

Girma

mafi girma: 800mm * 3000mm

Mafi ƙarancin: 25mm * 50mm

kauri: 1.5mm

Matsakaicin zafin jiki dumama allon E Type Etching Type

Na gargajiya matsakaicin zafin jiki dumama allon (silicon roba dumama allon) amfani da nickel gami lambun layi. Kamfanin ya yi amfani da nickel alloy foil don engraving aiki, saboda haka, za a iya styling daidai, mass samar.

High wutar lantarki yawa, za a iya dumama da sauri (3 ~ 5w / cm2).

Za a iya canza zafin jiki rarraba na dumama surface, saboda amfani da madaidaiciya line aiki, zai iya sa zafin jiki daidai (ƙasa 3 ℃)

Wutar lantarki density

Saboda 1 ~ 5W / cm2 dumama shigarwa yanayin, zafin jiki sarrafa hanyoyin daban-daban, da wutar lantarki yawa zai sami babban canji.

fasaha sigogi

zafi juriya

Cikakken amfani da zafin jiki: 200 ℃

Matsakaicin zafin jiki: 250 ℃

halayen lantarki

Ikon haƙuri: ƙasa 10%

Kare juriya: 100MΩ

ƙarfin lantarki juriya: 1500V (50HZ) / 1min

Silicone roba dumama farantin (matsakaicin zafi fasaha)Kasuwancin Project

General likita - daidaito likita kayan aiki Fuzhou Sica - dakin gwaje-gwaje kayan aiki Danten Air - Sadarwa inji dakin batir panel