GSD-PM413A cikakken atomatik tin paste buga inji ne irin samar da kayan aiki da ake bukata a lokacin SMT tsari masana'antu. Yana yafi ƙunshi karfe net, tin paste, buga, motsi sarrafa kewaye kwamitin da sauransu, kuma za a iya amfani da cikakken atomatik samar da layin haɗi.

A. aiki ka'ida:

Da farko, don yin kwakwalwan walda na kwakwalwan walda na kwakwalwan walda na kwakwalwan walda na kwakwalwan walda na kwakwalwan walda na kwakwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda na kwalwan walda.

Abubuwan da ke cikin na'urar saiti:

1, shirye-shiryen dakatar da buga kai: biyu saiti mataki motor drive, gaba da baya scraper matsin lamba guda daidaitawa, tabbatar da gaba da baya buga rashin daidaito da aka haifar da rashin daidaito saboda gajiya na scraper kayan; Ingantaccen sarrafa tafiya, inganta buga inganci, anti-tin paste leakage.

2, misali irin bakin karfe scraper, musamman tsara, inganta lambar aiki rayuwa

3, sama / ƙasa gani daidai daidaitawa tsarin, tabbatar da buga karkatarwa

4, bushe / danshi / inji, shirye-shirye cibiyar sadarwa tsarin tsaftacewa, dace da daban-daban girman karfe cibiyar sadarwa

5, PCB gripping na'urar tsarin daidaita magnetic allura da inji suction disk tabbatar da PCB gefen m clamping na'urar - tabbatar da PCB gripping ba zai samar da karkata karkata lokacin; PCB na'urar ƙarfin lamba (musamman don PCB ƙasa da 0.6) - tabbatar da PCB daidaito.

6, GSD-PM413A cikakken atomatik tin paste buga inji kayan aiki dace da daban-daban kauri PCB tsawo daidaitawa dandali - tabbatar da PCB da karfe cibiyar sadarwa mai kyau.

Min frame size: 420X500mm;

Max frame girma: 737X737mm;

Yanar gizo kauri: 25 ~ 40mm;

Min girman PCB: 50X50mm;

Max girman PCB: 400X300mm;

PCB kauri: 0.2 ~ 6mm;

PCB karkata: Max.PCB diagonal 1%;

Bayar da tsawo: 900 ± 40mm;

Hanyar watsa: hagu-dama; dama-hagu; hagu-hagu; dama-dama;

Sufuri gudun: 1500mm / S (shirye-shirye);

Hanyar goyon bayan PCB: Magnetic allura / za a iya daidaita litar dandali;

Matsayi clamping hanyar PCB: musamman bangare matsa lamba, gefen clamp, inji suction baki;

Printing shugaba: biyu tsaye motor drive buga shugaba;

cutter gudun: 6 ~ 300mm / sec;

cutter matsin lamba: 0 ~ 10Kg / cm2;

Scratcher kusurwa: 55 ° (misali;

Scraper iri: karfe scraper misali, goma scraper;

Karfe net rabuwa gudun: 0.1 ~ 20mm / sec (shirye-shirye);

Hanyar tsaftacewa: bushewa, danshi, famfo inji (shirye-shirye);

Aiki tebur daidaitawa kewayon: X ± 5mm; Y ± 5mm; θ ± 2 °;

Maimaita daidaito: ± 0.01mm;

Buga daidaito: ± 0.025mm;

Printing zagaye: ≤7s (ban da bugawa da tsaftacewa);

lokacin canzawa: <5Min;

Amfani da iska matsin lamba: 4.5 ~ 6Kg / cm2;

Wutar lantarki: AC220 ± 10%, 50 / 60HZ 1Φ 3KW;

Hanyar sarrafawa: Full kwamfuta sarrafawa;

Girman girman inji: 1146 (L) X1364 (W) X1440 (H) mm;

Injin nauyi: kimanin 1000kg;

PCB watsa a kan allon tsayi: 35mm;